LaserPecker 4 — Silver Jewellery
2 community-tested settings for mark Silver Jewellery on the LaserPecker 4. Always run a test on scrap material first.
Where to buy
Buy the LaserPecker 4 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover mark Silver Jewellery on the LaserPecker 4 (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to mark Silver Jewellery on the LaserPecker 4?
The top-rated community setting uses 2000 mm/s at 70% power. Gentle on silver jewellery. 2W is well-suited for fine pieces.
How many passes does the LaserPecker 4 need to engrave Silver Jewellery?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Silver Jewellery on the LaserPecker 4?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Silver Jewellery on the LaserPecker 4?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the LaserPecker 4 for Silver Jewellery?
The LaserPecker 4 works with LaserPecker. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Silver Jewellery
Templates ready to cut on your LaserPecker 4 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris