OMTech 60W CO2: Polypropylene (Coroplast)
2 community-tested settings for cut, engrave Polypropylene (Coroplast) on the OMTech 60W CO2. Always run a test on scrap material first.
Where to buy
OMTech 60W CO2: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Polypropylene (Coroplast) on the OMTech 60W CO2 (60W CO₂ laser).
2 settings
Frequently asked questions
What speed should I use to cut Polypropylene (Coroplast) on the OMTech 60W CO2?
The top-rated community setting uses 15 mm/s at 39% power. Air assist strongly recommended to clear melted plastic and keep the flutes from re-fusing. Typical corrugated board is ~4mm.
How many passes does the OMTech 60W CO2 need to cut Polypropylene (Coroplast)?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Polypropylene (Coroplast) on the OMTech 60W CO2?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the OMTech 60W CO2 for Polypropylene (Coroplast)?
The OMTech 60W CO2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with Polypropylene (Coroplast)
Templates ready to cut on your OMTech 60W CO2 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris