xTool P2 — Marble Tile

What speed should I use to engrave Marble Tile on the xTool P2?

The top-rated community setting uses 108 mm/s at 44% power. CO2 60W on marble. Fast engrave.

Can the xTool P2 cut Marble Tile?

Cutting Marble Tile on the xTool P2 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.

How many passes does the xTool P2 need to engrave Marble Tile?

All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.

Do I need air assist for Marble Tile on the xTool P2?

Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.

What DPI should I use to engrave Marble Tile on the xTool P2?

Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.

What software do I use with the xTool P2 for Marble Tile?

The xTool P2 works with xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.