Bonny Creations
Bonny Creations
Sign In
← All Materials

Marble Tile

54 settings31 machines

This page lists 54 community-tested settings for Marble Tile. Slate and stone engrave by fracturing the surface - the laser removes material to reveal a lighter color. Invert your image for best results.

Related ToolsRotary / Tumbler Calculator →Photo → SVG Vectorizer →Browse by Machine →
stone
+ Submit a setting for this material

Top setting per machine

MachineOpSpeedPowerPasses
Glowforge Proengrave250 mm/s30%1
Glowforge Basicengrave210 mm/s35%1
OMTech 80W CO2engrave430 mm/s20%1
OMTech 60W CO2engrave350 mm/s24%1
OMTech 40W CO2engrave280 mm/s30%1
Creality Falcon2engrave2000 mm/min85%1
Ortur Laser Master 3engrave2000 mm/min85%1
Atomstack A20 Proengrave2000 mm/min85%1
Sculpfun S9engrave1500 mm/min80%1
Sculpfun S30 Proengrave2000 mm/min85%1
xTool D1 Proengrave2000 mm/min85%1
xTool S1engrave2000 mm/min85%1

Showing top 12 of 31 machines. See full list below.

Works with these machines

Glowforge ProGlowforge BasicOMTech 80W CO2OMTech 60W CO2OMTech 40W CO2Creality Falcon2Ortur Laser Master 3Atomstack A20 ProSculpfun S9Sculpfun S30 ProxTool D1 ProxTool S1OMTech Polar+ 55WBoss LS-1630Thunder Laser Nova 35Monport 80W CO2FLUX Ador ProTrotec Speedy 300Epilog Fusion ProFLUX AdorMonport 40W CO2OMTech PolarEpilog Zing 24Flux BeamoComMarker B6 20W UVxTool F1 Ultra (UV)Longer B1K40 CO2Monport GP 40W CO2Glowforge PlusxTool P2

54 settings

Glowforge Pro45Wco2
engrave
Speed250 mm/sPower30–30%Passes1DPI400

Higher DPI marble engrave for fine detail portraits. Wipe surface before engraving for consistent results.

Shop Glowforge Pro →More settings for this machine →
Glowforge Pro45Wco2
engrave
Speed220 mm/sPower25–30%Passes1DPI300

Marble CO2 engrave — ablates surface cleanly. Start at lower power end; increase if mark is faint on light-colored marble.

Shop Glowforge Pro →More settings for this machine →
Glowforge Basic45Wco2
engrave
Speed210 mm/sPower35–35%Passes1DPI400

Higher DPI marble engrave for fine detail portraits. Wipe surface before engraving for consistent results.

Shop Glowforge Basic →More settings for this machine →
Glowforge Basic45Wco2
engrave
Speed180 mm/sPower30–35%Passes1DPI300

Marble CO2 engrave — ablates surface cleanly. Start at lower power end; increase if mark is faint on light-colored marble.

Shop Glowforge Basic →More settings for this machine →
OMTech 80W CO280Wco2
engrave
Speed430 mm/sPower20–20%Passes1DPI400

Higher DPI marble engrave for fine detail portraits. Wipe surface before engraving for consistent results.

Shop OMTech 80W CO2 →More settings for this machine →
OMTech 80W CO280Wco2
engrave
Speed400 mm/sPower15–20%Passes1DPI300

Marble CO2 engrave — ablates surface cleanly. Start at lower power end; increase if mark is faint on light-colored marble.

Shop OMTech 80W CO2 →More settings for this machine →
OMTech 60W CO260Wco2
engrave
Speed350 mm/sPower24–24%Passes1DPI400

Higher DPI marble engrave for fine detail portraits. Wipe surface before engraving for consistent results.

Shop OMTech 60W CO2 →More settings for this machine →
OMTech 60W CO260Wco2
engrave
Speed320 mm/sPower19–24%Passes1DPI300

Marble CO2 engrave — ablates surface cleanly. Start at lower power end; increase if mark is faint on light-colored marble.

Shop OMTech 60W CO2 →More settings for this machine →
OMTech 40W CO240Wco2
engrave
Speed280 mm/sPower30–30%Passes1DPI400

Higher DPI marble engrave for fine detail portraits. Wipe surface before engraving for consistent results.

Shop OMTech 40W CO2 →More settings for this machine →
OMTech 40W CO240Wco2
engrave
Speed250 mm/sPower25–30%Passes1DPI300

Marble CO2 engrave — ablates surface cleanly. Start at lower power end; increase if mark is faint on light-colored marble.

Shop OMTech 40W CO2 →More settings for this machine →
Creality Falcon222Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop Creality Falcon2 →More settings for this machine →
Creality Falcon222Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop Creality Falcon2 →More settings for this machine →
Ortur Laser Master 310Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop Ortur Laser Master 3 →More settings for this machine →
Ortur Laser Master 310Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop Ortur Laser Master 3 →More settings for this machine →
Atomstack A20 Pro20Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop Atomstack A20 Pro →More settings for this machine →
Atomstack A20 Pro20Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop Atomstack A20 Pro →More settings for this machine →
Sculpfun S910Wdiode
engrave
Speed1500 mm/minPower80–80%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop Sculpfun S9 →More settings for this machine →
Sculpfun S910Wdiode
engrave
Speed1000 mm/minPower75–80%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop Sculpfun S9 →More settings for this machine →
Sculpfun S30 Pro33Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop Sculpfun S30 Pro →More settings for this machine →
Sculpfun S30 Pro33Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop Sculpfun S30 Pro →More settings for this machine →
xTool D1 Pro20Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop xTool D1 Pro →More settings for this machine →
xTool D1 Pro20Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop xTool D1 Pro →More settings for this machine →
xTool S140Wdiode
engrave
Speed2000 mm/minPower85–85%Passes1DPI400

Higher speed with full power for faster throughput on marble tile engravings.

Shop xTool S1 →More settings for this machine →
xTool S140Wdiode
engrave
Speed1500 mm/minPower80–85%Passes1DPI300

Marble ablates cleanly. Lower power than slate — start here and increase if mark is faint.

Shop xTool S1 →More settings for this machine →
OMTech Polar+ 55W55Wco2
engrave
Speed100 mm/sPower45%Passes1DPI300

CO2 ablates marble surface. Bright clean result.

More settings for this machine →
Boss LS-1630100Wco2
engrave
Speed155 mm/sPower35%Passes1DPI300
More settings for this machine →
Thunder Laser Nova 35100Wco2
engrave
Speed155 mm/sPower35%Passes1DPI300
More settings for this machine →
Monport 80W CO280Wco2
engrave
Speed130 mm/sPower40%Passes1DPI300
Shop Monport 80W CO2 →More settings for this machine →
FLUX Ador Pro80Wco2
engrave
Speed130 mm/sPower40%Passes1DPI300
More settings for this machine →
Trotec Speedy 30060Wco2
engrave
Speed108 mm/sPower44%Passes1DPI300
More settings for this machine →
Epilog Fusion Pro50Wco2
engrave
Speed90 mm/sPower46%Passes1DPI300
More settings for this machine →
FLUX Ador50Wco2
engrave
Speed90 mm/sPower46%Passes1DPI300
More settings for this machine →
Monport 40W CO240Wco2
engrave
Speed75 mm/sPower50%Passes1DPI300
Shop Monport 40W CO2 →More settings for this machine →
OMTech Polar30Wco2
engrave
Speed60 mm/sPower55%Passes1DPI300

CO2 ablates marble surface. Bright clean result.

Shop OMTech Polar →More settings for this machine →
Epilog Zing 2430Wco2
engrave
Speed60 mm/sPower55%Passes1DPI300

CO2 ablates marble surface. Bright clean result.

More settings for this machine →
Flux Beamo30Wco2
engrave
Speed60 mm/sPower55%Passes1DPI300

CO2 ablates marble surface. Bright clean result.

More settings for this machine →
ComMarker B6 20W UV20Wuv
engrave
Speed300 mm/sPower40%Passes1
★★★★★

Detailed mark on marble. UV keeps edges sharper than IR.

More settings for this machine →
xTool F1 Ultra (UV)2Wuv
engrave
Speed200 mm/sPower45%Passes1
★★★★★

Detailed engraving on marble. UV gives clean edges with no carbonization.

Shop xTool F1 Ultra (UV) →More settings for this machine →
Longer B122Wdiode
engrave
Speed2800 mm/minPower80%Passes1DPI254
★★★★★

Marble tile at 40W diode. Subtle frosted result.

Shop Longer B1 →More settings for this machine →
K40 CO235Wco2
engrave
Speed80 mm/sPower55%Passes1DPI300
★★★★★

CO2 40W on marble. Frosted white result.

Shop K40 CO2 →More settings for this machine →
Creality Falcon222Wdiode
engrave
Speed2800 mm/minPower80%Passes1DPI254
★★★★★

Marble tile at 40W diode. Subtle frosted result.

Shop Creality Falcon2 →More settings for this machine →
Monport GP 40W CO240Wco2
engrave
Speed80 mm/sPower55%Passes1DPI300
★★★★★

CO2 40W on marble. Frosted white result.

More settings for this machine →
Ortur Laser Master 310Wdiode
engrave
Speed1600 mm/minPower90%Passes1DPI254
★★★★★

Marble tile at 10W. Subtle frosted mark. Test first.

Shop Ortur Laser Master 3 →More settings for this machine →
Atomstack A20 Pro20Wdiode
engrave
Speed2200 mm/minPower85%Passes1DPI254
★★★★★

Marble tile at 20W. High power for frosted result.

Shop Atomstack A20 Pro →More settings for this machine →
Sculpfun S910Wdiode
engrave
Speed1600 mm/minPower90%Passes1DPI254
★★★★★

Marble tile at 10W. Subtle frosted mark. Test first.

Shop Sculpfun S9 →More settings for this machine →
Sculpfun S30 Pro33Wdiode
engrave
Speed2200 mm/minPower85%Passes1DPI254
★★★★★

Marble tile at 20W. High power for frosted result.

Shop Sculpfun S30 Pro →More settings for this machine →
OMTech 60W CO260Wco2
engrave
Speed108 mm/sPower44%Passes1DPI300
★★★★★

CO2 60W on marble. Fast engrave.

Shop OMTech 60W CO2 →More settings for this machine →
OMTech 40W CO240Wco2
engrave
Speed80 mm/sPower55%Passes1DPI300
★★★★★

CO2 40W on marble. Frosted white result.

Shop OMTech 40W CO2 →More settings for this machine →
Glowforge Pro45Wco2
engrave
Speed95 mm/sPower48%Passes1DPI300
★★★★★

CO2 55W on marble tile.

Shop Glowforge Pro →More settings for this machine →
Glowforge Plus45Wco2
engrave
Speed95 mm/sPower48%Passes1DPI300
★★★★★

CO2 55W on marble tile.

Shop Glowforge Plus →More settings for this machine →
Glowforge Basic45Wco2
engrave
Speed80 mm/sPower55%Passes1DPI300
★★★★★

CO2 40W on marble. Frosted white result.

Shop Glowforge Basic →More settings for this machine →
xTool P255Wco2
engrave
Speed108 mm/sPower44%Passes1DPI300
★★★★★

CO2 60W on marble. Fast engrave.

Shop xTool P2 →More settings for this machine →
xTool D1 Pro20Wdiode
engrave
Speed2200 mm/minPower85%Passes1DPI254
★★★★★

Marble tile at 20W. High power for frosted result.

Shop xTool D1 Pro →More settings for this machine →
xTool S140Wdiode
engrave
Speed2800 mm/minPower80%Passes1DPI254
★★★★★

Marble tile at 40W diode. Subtle frosted result.

Shop xTool S1 →More settings for this machine →
Materials

Supplies to have on hand

Materials and accessories that pair well with Marble Tile laser projects.

Slate Tile 4-inchPopular engraving substrate - high contrast results.
Granite CoastersLaser-engrave photos and designs onto granite.
Transfer TapeMask stone surface to capture laser debris.
Amazon links are affiliate links. We earn a small commission at no extra cost to you.

Frequently Asked Questions

What are the best laser settings for Marble Tile?

A top-rated community setting for Marble Tile on the Glowforge Pro is speed 250 mm/s, power 30%. There are 54 community-tested settings for Marble Tile across 31 machines on this page.

Can a diode laser engrave or cut Marble Tile?

Yes - there are 22 community settings for Marble Tile on diode lasers and 30 on CO₂ lasers. CO₂ lasers generally cut faster and cleaner, but modern high-wattage diode lasers handle most stone work well.

What Makers Say

★★★★★5.0· 6 reviews
View all on Etsy →
★★★★★

"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."

— Anna

★★★★★

"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."

— Camp

★★★★★

"Excellent quality and design. Cut clean and neat!"

— LYNN

★★★★★

"Great jigs. Appreciate the time saved not having to build this from scratch!"

— Bruce

★★★★★

"Excellent quality. Item as described. Expectations exceeded."

— Michael

★★★★★

"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."

— chris

Leave a review →