3mm Cherry Plywood

Clean cut. Cherry has tight grain, needs consistent speed.

Lovely warm tones on cherry. Very popular for personalised gifts. Keep power moderate to preserve the colour.

Cherry cuts cleanly with a warm reddish edge. Beautiful for jewellery and gift items.

What are the best laser settings for 3mm Cherry Plywood?

A top-rated community setting for 3mm Cherry Plywood on the Atomstack A5 Pro is speed 3000 mm/min, power 100%, 2 passes. There are 3 community-tested settings for 3mm Cherry Plywood across 2 machines on this page.

Can a diode laser engrave or cut 3mm Cherry Plywood?

Yes - there are 1 community settings for 3mm Cherry Plywood on diode lasers and 2 on CO₂ lasers. CO₂ lasers generally cut faster and cleaner, but modern high-wattage diode lasers handle most wood work well.

Do I need air assist for 3mm Cherry Plywood?

67% of the community settings for 3mm Cherry Plywood use air assist. Air assist is strongly recommended - it reduces charring and improves cut quality.

What speed and power to cut 3mm Cherry Plywood in one pass?

Settings vary by machine wattage. For a 20W diode laser, cutting 3mm Cherry Plywood typically requires high power (90–100%) at moderate speed (1500–3000 mm/min) with air assist. CO₂ lasers can cut 3mm material faster - 20–60 mm/s at 50–70% power is common. Check the settings table below for your specific machine.