6mm Maple Plywood Laser Settings
This page lists 0 community-tested settings for 6mm Maple Plywood. Wood is one of the most popular laser engraving materials. Results vary by species, thickness, and grain - always run a test first.
Hardwood plywood with fine grain. Engraves with high contrast. May require multiple passes to cut cleanly.
0 settings
No settings match these filters.
Supplies to have on hand
Materials and accessories that pair well with 6mm Maple Plywood laser projects.
From the Blog
Frequently Asked Questions
What speed and power to cut 6mm Maple Plywood in one pass?
Settings vary by machine wattage. For a 20W diode laser, cutting 6mm Maple Plywood typically requires high power (90–100%) at moderate speed (1500–3000 mm/min) with air assist. CO₂ lasers can cut 6mm material faster - 20–60 mm/s at 50–70% power is common. Check the settings table below for your specific machine.
Some links on this page are affiliate links. We may earn a small commission at no extra cost to you.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris