Ceramic Mug

5 settings5 machines

This page lists 5 community-tested settings for Ceramic Mug. Slate and stone engrave by fracturing the surface - the laser removes material to reveal a lighter color. Invert your image for best results.

stone

+ Submit a setting for this material

Top setting per machine

Machine	Op	Speed	Power	Passes
ComMarker B6 20W UV	engrave	300 mm/s	35%	1
xTool F1 Ultra (UV)	engrave	200 mm/s	45%	1
OMTech 80W CO2✓	engrave	300 mm/s	50%	1
xTool P2✓	engrave	280 mm/s	60%	1
OMTech 60W CO2✓	engrave	300 mm/s	55%	1

Works with these machines

ComMarker B6 20W UV xTool F1 Ultra (UV)OMTech 80W CO2 xTool P2 OMTech 60W CO2

5 settings

ComMarker B6 20W UV20Wuv

engrave

Speed300 mm/sPower35%Passes1DPI600

★★★★★

Rotary required. No CerMark needed — UV marks ceramic directly.

More settings for this machine →

xTool F1 Ultra (UV)2Wuv

engrave

Speed200 mm/sPower45%Passes1DPI600

★★★★★

Rotary required. UV marks food-safe ceramic without coatings.

Shop xTool F1 Ultra (UV) →More settings for this machine →

OMTech 80W CO280Wco2

Cermark coatedengrave✓ Verified

Speed300 mm/sPower50%Passes1DPI300

★★★★★

Cermark on mugs with rotary. 80W needs lower power than smaller machines. Thin even coats of Cermark work better than thick ones.

Shop OMTech 80W CO2 →More settings for this machine →

xTool P255Wco2

Cermark coatedengrave✓ Verified

Speed280 mm/sPower60%Passes1DPI300

★★★★★

Cermark on ceramic mug with rotary attachment. Coat, dry, laser, rinse. Permanent food-safe mark. Great for personalised gift businesses.

Shop xTool P2 →More settings for this machine →

OMTech 60W CO260Wco2

Cermark coatedengrave✓ Verified

Speed300 mm/sPower55%Passes1DPI300

★★★★★

Apply Cermark spray to mug surface, let dry 10 minutes. Laser with rotary attachment. Wash off Cermark with water — permanent black fused mark remains. Allow 24 hours before dishwasher use.

Shop OMTech 60W CO2 →More settings for this machine →

Materials

Supplies to have on hand

Materials and accessories that pair well with Ceramic Mug laser projects.

Slate Tile 4-inchPopular engraving substrate - high contrast results.

Settings →Buy on Amazon →

Granite CoastersLaser-engrave photos and designs onto granite.

Buy on Amazon →

Transfer TapeMask stone surface to capture laser debris.

Buy on Amazon →

Amazon links are affiliate links. We earn a small commission at no extra cost to you.

Frequently Asked Questions

What are the best laser settings for Ceramic Mug?

A top-rated community setting for Ceramic Mug on the ComMarker B6 20W UV is speed 300 mm/s, power 35%. There are 5 community-tested settings for Ceramic Mug across 5 machines on this page.

What Makers Say

★★★★★5.0· 6 reviews

View all on Etsy →

★★★★★

"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."

— Anna

★★★★★

"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."

— Camp

★★★★★

"Excellent quality and design. Cut clean and neat!"

— LYNN

★★★★★

"Great jigs. Appreciate the time saved not having to build this from scratch!"

— Bruce

★★★★★

"Excellent quality. Item as described. Expectations exceeded."

— Michael

★★★★★

"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."

— chris

Leave a review →