FLUX Ador Pro Settings & Speeds
Updated May 2026 · 64 tested settings · 38 materials
Free download
📧 Email me the FLUX Ador Pro cheat sheet (PDF)
Printable one-pager with the most-used speed/power/passes. Plus 10% off your first order.
We'll only email about new settings + occasional new releases. Unsubscribe anytime.
The FLUX Ador Pro is a 80W co2 laser engraver with a 600×375mm work area. This page lists 64 community-tested settings covering speed, power, passes, air assist, and DPI across a range of materials. Always run a test cut on scrap material first — results vary depending on your material batch, focus, and ambient conditions.
The FLUX Ador Pro is the higher-power version of FLUX's enclosed diode laser. It offers faster cutting and engraving than the standard Ador while keeping the same enclosed, camera-assisted design and Beam Studio workflow. Best for wood, leather, and light acrylic. A natural upgrade for Ador users who need more throughput without changing platforms.
Similar machines
Materials covered
Don't see your material?
64 settings
From the Blog
Frequently Asked Questions
What materials can the FLUX Ador Pro engrave or cut?
The FLUX Ador Pro has community-tested settings for 3mm Mirrored Acrylic, 3mm Clear Acrylic (Cast), 3mm Maple Plywood, Stainless Steel, Marble Tile, Rubber Stamp Material, 6mm MDF, 6mm Baltic Birch Plywood, and 30 more. Results vary by material batch, focus, and ambient conditions — always test on scrap first.
What is the work area of the FLUX Ador Pro?
The FLUX Ador Pro has a work area of 600×375 mm (approximately 24×15 inches).
What settings should I use to cut Rubber Stamp Material on the FLUX Ador Pro?
A community-tested starting point is speed 13 mm/s, power 82% in a single pass. Always run a test cut on scrap to confirm before committing to your project.
What can a CO₂ laser like the FLUX Ador Pro cut that a diode laser cannot?
CO₂ lasers can cut and engrave clear acrylic, glass (with care), fabric, and thicker wood more cleanly than diode lasers, because the CO₂ wavelength is absorbed by materials that are transparent to diode light. This makes the FLUX Ador Pro more versatile for craft and production use.
Compare with similar machines
Same laser type · similar wattage
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris