Monport Fireproof 60W CO2 Settings & Speeds
Updated September 2026 · 59 tested settings · 35 materials
Essential laser accessories
Every Monport Fireproof 60W CO2 owner eventually needs these. Goggles first: always.
Free download
📧 Email me the Monport Fireproof 60W CO2 cheat sheet (PDF)
Printable one-pager with the most-used speed/power/passes. Plus 10% off your first order.
Cheat sheet only, no newsletter unless you tick the box above. Unsubscribe anytime.
The Monport Fireproof 60W CO2 is a 60W co2 laser engraver with a 406×610mm work area. This page lists 59 community-tested settings covering speed, power, passes, air assist, and DPI across a range of materials. Always run a test cut on scrap material first: results vary depending on your material batch, focus, and ambient conditions.
Similar machines
Materials covered
Don't see your material?
59 settings
Shopping for a Monport Fireproof 60W CO2? Check the current price.
See current price →From the Blog
Frequently Asked Questions
What materials can the Monport Fireproof 60W CO2 engrave or cut?
The Monport Fireproof 60W CO2 has community-tested settings for Ceramic Tile, Basswood, Leather, 3mm Basswood Plywood, 3mm MDF, Chipboard 2mm, 3mm Clear Acrylic, Genuine Leather, and 27 more. Results vary by material batch, focus, and ambient conditions: always test on scrap first.
What is the work area of the Monport Fireproof 60W CO2?
The Monport Fireproof 60W CO2 has a work area of 406×610 mm (approximately 16×24 inches).
What settings should I use to cut Basswood on the Monport Fireproof 60W CO2?
A community-tested starting point is speed 28 mm/s, power 51% in a single pass. Enable air assist for a cleaner edge. Always run a test cut on scrap to confirm before committing to your project.
What can a CO₂ laser like the Monport Fireproof 60W CO2 cut that a diode laser cannot?
CO₂ lasers can cut and engrave clear acrylic, glass (with care), fabric, and thicker wood more cleanly than diode lasers, because the CO₂ wavelength is absorbed by materials that are transparent to diode light. This makes the Monport Fireproof 60W CO2 more versatile for craft and production use.
Compare with similar machines
Same laser type · similar wattage
Some links on this page are affiliate links. We may earn a small commission at no extra cost to you.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris