OMTech Polar+ 55W Settings & Speeds
Updated May 2026 · 28 tested settings · 17 materials
Where to buy
Buy the OMTech Polar+ 55W — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
Free download
📧 Email me the OMTech Polar+ 55W cheat sheet (PDF)
Printable one-pager with the most-used speed/power/passes. Plus 10% off your first order.
Cheat sheet only, no newsletter unless you tick the box above. Unsubscribe anytime.
The OMTech Polar+ 55W is a 55W co2 laser engraver. This page lists 28 community-tested settings covering speed, power, passes, air assist, and DPI across a range of materials. Always run a test cut on scrap material first — results vary depending on your material batch, focus, and ambient conditions.
The OMTech Polar+ 55W is the higher-power version of OMTech's compact enclosed CO₂ desktop laser. At 55W it cuts thicker material than the 30W Polar — handling 5mm basswood in a single pass and 3mm acrylic cleanly — while keeping the same enclosed desktop footprint. LightBurn compatible. A good upgrade path for Polar owners who need more cutting power without moving to a larger machine.
Similar machines
Materials covered
Don't see your material?
Help wanted — missing settings for:
28 settings
Ready to buy the OMTech Polar+ 55W?
Buy Now →From the Blog
Frequently Asked Questions
What materials can the OMTech Polar+ 55W engrave or cut?
The OMTech Polar+ 55W has community-tested settings for 3mm Mirrored Acrylic, 3mm Clear Acrylic (Cast), 3mm Maple Plywood, Stainless Steel, Marble Tile, Rubber Stamp Material, 6mm MDF, 6mm Baltic Birch Plywood, and 9 more. Results vary by material batch, focus, and ambient conditions — always test on scrap first.
What settings should I use to cut Rubber Stamp Material on the OMTech Polar+ 55W?
A community-tested starting point is speed 10 mm/s, power 82% in a single pass. Always run a test cut on scrap to confirm before committing to your project.
What can a CO₂ laser like the OMTech Polar+ 55W cut that a diode laser cannot?
CO₂ lasers can cut and engrave clear acrylic, glass (with care), fabric, and thicker wood more cleanly than diode lasers, because the CO₂ wavelength is absorbed by materials that are transparent to diode light. This makes the OMTech Polar+ 55W more versatile for craft and production use.
Compare with similar machines
Same laser type · similar wattage
Some links on this page are affiliate links. We may earn a small commission at no extra cost to you.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris